Sheepdog Terminology and Training Commands

Definitions of commands words & terms used by shepherds, farmers & handlers when working or training dogs for herding

© This page is protected by copyright laws and may not be reproduced without written permission from the copyright holder.

Alphabetical list
Away (to Me)
Biting
Casting
Come Bye
Crossdrive
Disqualified
Dogged Sheep
Double Gather
Drive (Trials)
Drive Gates
Driving
Droving
Electric Fence
Exhaust Pen
Eye
Fell
Fetch
Fetch Gates
Flanking
Flighty Sheep
Fully Trained Dog
Gather
Get Back
Get Out
Get Up
Good Stop
Grip
Gripping
Heavy Sheep
Hurdles
In Here
International Trial
ISDS
Left Hand Drive
Letting Out Pen
Lie Down
Lift
Light Sheep
Look Back
Look Back (trials)
National Trial
Novice Trial
Nursery Trial
Open Trial
Outrun
Outrun (trials)
Panels
Partly Trained Dog
Pedigree
Peg
Pen
Pen (Trials)
Penning
Point of Balance
Post
Powerful Dog
Pushing Up
Registered Dog
Release Pen
Retired
Right Hand Drive
Shed
Single
Singling
Shedding
Shedding Ring
Square Flanks
Stand
Started Dog
Steady
Stop
Stud Dog
Stud Book
Take Time
That'll Do
There
Timed Out
Too Much Eye
Walk On
Walk Up
Weak Dog
Wearing

Stock Herding Terms

Outrun
The outrun begins when a herding dog leaves the handler and goes out wide around the stock in order to bring them back to the handler or take them to some other place. If the dog were to run straight at the stock, it would probably frighten them further away, so ideally, the dog should run out wide enough to avoid stressing the stock. At the end of its outrun, the dog should be in a position to take all the sheep or cattle to the required place. (top)
Flanking / Casting
The dog casting around its cattle or sheep in a circular fashion. The dog should maintain a constant distance from the stock whilst flanking. When commanded, the dog should stop without moving closer to the stock.
Several of our online training tutorials explain how to improve your dog's flanks when it works cattle, sheep, or other livestock. (top)
Gather
Strictly speaking, a gather is when a dog goes out around the stock and brings them to the handler, but gather is also the term used for much larger operations on vast expanses of (often mountainous) ground where several or even many dogs and handlers are sent out to gather (usually) sheep and take them to a designated place. (top)
Driving
Not to be confused with droving, driving involves the dog working on its own, pushing the sheep or cattle away from the handler, sometimes for considerable distances. It has a great number of uses and although driving has a reputation for being difficult to teach because a dog's natural reaction is to bring the stock to the handler rather than push them away, with patience and an understanding of why the dog finds it difficult, it's not so hard to achieve and will reward the handler many times over.
There are no fewer than three tutorials on the subject of Driving in our online tutorials library. (top)
Droving
Not to be confused with driving (above) droving involves the dog working alongside or close to the handler, pushing the sheep or cattle ahead of them. It's very much simpler to teach the dog to drove, than it is to teach driving, because the dog will be happy to work closely with the handler. (top)
Good Stop
A dog which stops immediately on command, is said to have "a good stop". Unfortunately, in their efforts to achieve a good stop, trainers often undermine the dog's confidence. Rather than trying to get the perfect stop too soon, we prefer to work on it gradually throughout the dog's training. (top)
Square Flanks
When you command your dog to flank one way or the other, it should turn sharply and move around the stock at the same distance from them as it was when you gave the command. Many dogs insist on moving closer to the stock when commanded to flank. This is a bad habit as can unsettle the stock. A dog with "square flanks" is a joy to work.
Several of our online training tutorials explain how to improve your dog's flanks when it works cattle, sheep, or other livestock. (top)
Wearing
A dog that is wearing will flank from side to side as it brings or drives the sheep. In farm work this can help the dog to bring all of the sheep and make sure none are left behind, especially when working a flock. In sheepdog trials, it can also be useful if the sheep are stubborn, but it runs the risk of the sheep deviating from their line, thus losing points for the run. (top)
Yard Work / Pushing up
Once the stock are inside a sorting yard or pen, often they will not go through the sorting race unless there is a dog behind them, pushing them through. Once dogs become confident in a yard, they can become highly skilled at it, and a good dog will only use just enough force to get the stock through the race without undue stress. (top)
Sorting Race
A sorting race is usually a long narrow area, designed to (ideally) allow only one animal at a time to pass through it. At the end of the race is a sorting gate which can be operated to direct some animals into one holding pen, and others into another. (top)
Grip / Gripping / Biting
A case of the dog biting the stock. Often brought about by fear, gripping can be a sign of lack of confidence shown by the dog. It's not allowed in sheepdog trials. Instant disqualification being the normal penalty, but if the judge considers the sheep to have been sufficiently awkward it is sometimes acceptable for the dog to nip the nose of a particularly difficult sheep.
In cattle work, it's often essential for the dog to nip the heels of the stock to get them to move in the required direction. As with the good stop (above) especially with sheepdogs, many handlers try to completely eliminate any gripping. This can have a severely detrimental effect on the dog's confidence. When dogs are faced with aggressive sheep, such as ewes with young lambs, they need some means of defending themselves. The sheep must be gathered in for their own health and welfare, so the dog must be able to move them. We prefer to put a command on the grip. We then discourage the dog from gripping unless we command it to. In our experience, dogs trained this way have far more confidence than dogs which have been totally forbidden to grip.
Management of the dog's grip is covered in several of our online tutorials. "Sometimes Nice is Not Enough" and "Training Max the Gripper" are two videos that will help get your dog under control while maintaining its confidence. Visit the online tutorials library for more details. (top)
  • ONLINE SHEEP AND CATTLE DOG TRAINING TUTORIALS
    Clear, inexpensive, sheep and cattle dog training instruction

    Click icon at bottom-right of viewer for full-screen mode.

    For a very small monthly (or annual) subscription, watch many hours of expertly presented sheepdog training lessons. Not just theory – we show you what should happen, and what to do when things go wrong. Signup now
    You may cancel payments at any time and continue to watch for the period paid for.

Stock Herding Commands

Come-Bye
Move around (circle) the stock in a clockwise direction (unfortunately, in a minority of areas it's the opposite way)! C is for Come-Bye - Clockwise. From facing the sheep, the dog should turn squarely and keep at a constant distance from the stock as it casts or flanks around them. (top)
Away / Away to Me
Move around (circle) the stock in an anti-clockwise direction (unfortunately, in some areas it's the opposite way)! A is for Away - Anti-clockwise. From facing the stock, the dog should turn squarely and keep at a constant distance from the stock as it casts or flanks around them.
Our "Starting" and "Give the Sheep Space" online tutorials will help you teach your dog to go round the stock. (top)
Lie Down / Stand / Stop
Confusing, this one! It can mean stop, or sometimes just slow down! With time and experience, the dog will learn that a sharp command means the handler wants it to stop immediately, but when the command is soft it should just check its speed to allow the sheep or cattle to go further ahead. More confusing still, some handlers want the dog to lie on the floor when it stops, while others prefer the dog to stay on its feet.
Learn more about training the dog to stop with our online tutorials. (top)
Get Back / Get Out
The dog is working too close and likely to cause stress to the stock. The command is used to send the dog further out to give the animals more room. (top)
In Here
Used during shedding or separating some animals (usually sheep) away from the main group. When a gap has been created between the stock, the handler uses "in here" to command the dog to move from its position on the opposite side of the stock, through the gap to separate them. The dog will then be expected to keep the separated animals away from the others, and take them away.
There's a tutorial on shedding in our online training tutorials library. (top)
Look Back
The dog must leave the sheep it's working, and turn around to look for more sheep. Regarded by many as advanced, this under-rated command is extremely useful for teaching a trainee dog to go back and collect some animals it's left behind. The dog will soon learn that it's easier to bring all the sheep or cattle at the first attempt, rather than have to go back a second time. (top)
Steady / Take Time
The dog should slow down - usually used to put more distance between dog and sheep when the dog's eagerness is likely to panic or stress the sheep.
Learn more about training the dog to go round stock with our online tutorials. (top)
That'll do
The dog must stop what it's doing and return directly to the handler. This command can be a great help when training a dog to drive. As the dog veers off line because it desperately wants to fetch the stock back to you, the dog is effectively getting farther and farther away from you. The dog's far more likely to obey the "That'll Do" command than a flanking command to bring it back towards you, so we use "That'll do" as a sort of "cheat card" to bring the dog closer, and therefore into a driving position behind the stock.
There are three tutorials about teaching a dog to drive sheep or cattle in our online tutorials library. (top)
There
Used by some handlers to tell the dog it has completed the required flanking manoeuvre (circling or casting) and should turn squarely back towards the stock. (We prefer to use the "Lie down" command, to avoid confusing the dog with too many commands). (top)
Walk Up / Walk On / Get up
These commands require the dog to move straight towards the sheep in a calm, steady fashion without spooking or stressing them. (top)

Herding or Sheepdog Trial Sections

In the Tutorials Library there are two great online sheepdog trials tutorials to help you prepare yourself and your dog for sheepdog trials and competitions. (top)

Outrun
Standing at "the post", the handler sends the dog to collect the sheep and start the run. The dog should go out in a pear shaped run, getting wider as it approaches the sheep. Towards the end of the outrun, the dog should move in behind the sheep, close enough to gain control, but leaving enough room to avoid disturbing them. In a trial the handler will choose the direction for the outrun. (top)
Lift
At the end of its outrun, the dog should be behind the sheep on the "Point of balance". The lift is when the sheep begin to move under the influence of the dog. It should be controlled and orderly. (top)
Point of balance
When the dog stops at the end of its outrun, it should be on the point of balance. This is not necessarily directly behind the sheep. The point of balance is where the dog needs to be to keep the sheep in place prior to moving them towards the handler at the lift. (top)
Fetch
The dog brings the sheep down the course towards the handler, making sure all the sheep pass through the fetch gates. If one or more sheep fail go go through the gates, no retry is allowed, and the sheep must not pass back through the gates. The sheep must pass behind the handler at the post, and they are driven towards some more gates. As the sheep reach a point directly behind the post, the drive section of the trial begins. (top)
Drive
Having completed the fetch and driven the sheep around behind the handler in the direction dictated by the course director or judge, the dog then drives the sheep away from the handler to the first drive gates. (top)
Crossdrive
After negotiating the first drive gates, the sheep are driven across the course to the second drive gates. The cross drive must be as straight and orderly as possible. Once again, no retries are allowed at any of the gates. (top)
Shed / Shedding
After passing through the second drive gates, the sheep are turned towards the shedding ring where dog and handler sort out and separate a specified number of sheep. The handler shouldn't leave the post until all the sheep are inside the shedding ring (about 40 yards in diameter). Until shedding is completed the sheep must stay within the ring, or points will be lost. Often, but not always, the judge will signal to the handler that the shed has been accepted, and the sheep must then be taken to the pen.
There's a tutorial on shedding in our online training tutorials library. (top)
Pen / Penning
The pen is a part of the sheepdog trials course where the sheep are driven into a small enclosure (sometimes the pen is a stock trailer but more usually it's a fenced enclosure with a gate). The handler holds the rope to the pen gate and must continue to hold it until the sheep are penned and the gate is closed. The handler is not allowed to touch the sheep or push them in to the pen using the gate. (top)
Single / Singling
Singling is similar to shedding - but more difficult! At open trials, once penning is completed a single sheep may be required to be separated from the main group and driven away. This operation is carried out in the shedding ring, and the sheep must not leave the ring until one has been singled off.
There's a tutorial on shedding in our online training tutorials library. (top)
Double Gather
At some of the bigger open trials, the dog must collect a group of sheep and bring them to a specified point. The dog is then commanded to go to another location on the trials course to collect a second group and bring them to join the first batch before continuing around the course. (top)
Look Back
The designated point at a double gather where the dog must abandon the sheep currently under its control and turn around to look for more sheep. An advanced "look back" can be done in such a way as to indicate to the dog which direction the new sheep lie in.
Several of our online training tutorials show you how to teach your dog to go back for sheep or cattle. (top)

Herding or Sheepdog Trials Hardware

Drive Gates
A pair of gates or hurdles - through which the dog should direct the sheep as part of the drive in sheepdog trialling. There are normally two sets of drive gates on each course. (top)
Exhaust Pen
Enclosure into which sheep are driven after each run at a sheep dog trial. If there are not enough sheep available for the number of competitors, the sheep are allowed to collect in the exhaust pen until there are a large number, and then they are taken back to the letting out pen and re-used in the trial. (top)
Fetch Gates
A pair of gates or hurdles - through which the dog brings the sheep during the fetch at a sheepdog trial. The "fetch" normally follows the "lift". (top)
Letting out Pen
Enclosure from which a specified number of sheep (normally between three and five) are released for each run at a sheep dog trial. (top)
Peg
Point to which the required number of sheep are brought before each run at a sheepdog trial. In more advanced sheepdog trials the sheep may not be visible to the dog or sometimes even the handler, at this stage. (top)
Pen
Enclosure into which the sheep must be driven during a sheepdog trial. Usually a temporary construction but sometimes a trailer. More recently, some trials have a "chute" arrangement, where the sheep merely pass through. This is much easier for handler and dog, a the sheep are more willing to go into the chute as there's no back in it, so they can see a way of escape. (top)
Post
Point at a sheepdog trial where the handler stands. The handler must not leave the post until the sheep reach the shedding ring (below) (top).
Shedding Ring
A 40 yard diameter circle (usually marked-out) close to the post, where the shed and / or singling takes place before or after "penning". (top)
  • FIRST STEPS IN BORDER COLLIE SHEEPDOG TRAINING
    FROM CHAOS TO CONTROL!
    2xDVD set. Watch the Preview Here

    Click icon at bottom-right of viewer for full-screen mode.

    Learn how to train your first sheepdog with the 2xDVD set that shows sheepdog training as it really is! As well as clear instruction on what to do, you’ll see things going wrong and how to put them right. More info
    We automatically ship the correct format for your location. Choice of six currencies to pay in! | Buy NOW




Herding or Sheepdog Trial Terms

In the Tutorials Library there are two great online sheepdog trials tutorials to help you prepare yourself and your dog for sheepdog trials and competitions.

Left Hand Drive
On completion of the fetch, the sheep must pass behind the handler in a clockwise direction and be driven towards the left hand drive gates. (top)
Right Hand Drive
On completion of the fetch, the sheep must pass behind the handler in an anticlockwise direction and be driven towards the right hand drive gates. (top)
Timed Out
Most sheep dog trials specify a time for each run. If a competitor cannot complete the course in the allocated time, they must leave the field but the run still earns points and counts towards the results. It's quite possible to win a trial even though you were timed out. (top)
Retired
If a run goes really badly, most competitors will leave the course without completing it. The run will score no points. It should be noted that even though you retire, you are normally expected to take your sheep to the exhaust pen. (top)
Disqualified
The judge asked the competitor to leave the course because of a rule infringement such as the dog leaving the course, or biting the sheep. (top)

Herding or Sheepdog Trials

In the Tutorials Library there are two great online sheepdog trials tutorials to help you prepare yourself and your dog for sheepdog trials and competitions.

International Trial
To qualify for the "International", dogs must be registered with the ISDS and become members of their national team (see below). The winner of the annual International Sheepdog Trial becomes the "ISDS Supreme Champion". (top)
National Trial
Run by the ISDS (International Sheep Dog Society) the "National" is sheepdog trial in which dogs qualify to represent their country in the International Sheepdog Trials. To qualify, dogs must be ISDS registered and gain points by successfully competing in open trials. (top)
Open Trial
A sheepdog trial in which entry is open to any competitor and dog - will include outrun, lift, fetch, drive, shed, pen and sometimes a single. Points awarded in open trials count towards qualification for National Sheepdog Trials. Dogs do not need to be registered with the ISDS to compete in open trials. (top)
Novice Trial
Open to less experienced dogs. Rules vary but normally for dogs which have not been placed in an open or won a novice trial. Will include outrun, lift, fetch, drive, shed and pen but not usually a single. ISDS registration is not required for dogs to compete in novice trials. (top)
Nursery Trial
Trial open to inexperienced dogs. Rules of entry vary but usually for dogs which have not been placed in any novice or open trial. A nursery sheepdog trial will typically include outrun, lift, fetch, drive and pen. Surprisingly, nursery sheepdog trials courses often have an outrun of equal length to novice or open trials. Dogs do not have to be ISDS registered to compete. (top)

Herding Dogs or Sheepdogs

Started Dog
A dog which has been taught the very basics of stock work. A started dog will usually run reliably around stock (rather than splitting them up) if sent to them from a short distance away. The started dog can be stopped (sometimes with a little difficulty) and taken away from the stock. (top)
Partly trained Dog
A partly trained dog is more skilled than a started dog. Usually reliably working around sheep from a short to medium outrun (rather than splitting them up) and stopping reasonably well on command. The partly trained dog will not usually have experience of penning, shedding, pushing stock up or through a handling area, but it will be a useful dog, and should learn more skills quite quickly. (top)
Fully trained Dog
There is no such thing as a fully trained dog. Even the world champion trials dog will have room for improvement at some skills and will be learning all the time. We have yet to find a dog which is fully skilled in every aspect of stock work (for instance, good cattle dogs can often be much too aggressive with sheep) but of course, there are a great number that are highly skilled in a good number of tasks. Every shepherd and every farmer has different requirements of a dog, so it's unwise to describe a dog as fully trained. (top)
Powerful Dog / Strong Dog
A powerful or strong dog is a confident dog. One which works in a relaxed way and which commands instant respect from the stock. It will stand no nonsense. If they stop, it will just keep coming towards them in such a confident manner, the animals will continue on their way. The dog's attitude and body language makes it clear to the stock that they have no choice. (top)
Weak Dog - (a term we dislike strongly)
A dog that's commonly called "weak" is simply a dog that has little confidence around stock. It may be extremely obedient and work well with light or co-operative animals but when faced with a difficult situation a dog has little confidence will either stop and stare, grip or even turn away from the stock altogether. Sheep can interpret weakness in a dog surprisingly quickly and will take advantage of it. It is therefore af paramount importance to avoid putting a young dog in a position where it might be challenged or (even worse) attacked by sheep.
The dog's confidence can be improved with a little care. "Sometimes Nice is Not Enough", "Calm But Firm" and "The Dog's Confidence" are three videos that will help you increase your dog's confidence when working stock. Visit the online tutorials library for more details. (top)
Eye
A good sheepdog needs what's known as "eye". This is a kind of powerful glare the dog can fix on sheep to make them move in the direction the handler wants. (top)
Too Much Eye - (another term we dislike strongly)
Farmers and shepherds say a dog has "too much eye" if it appears to become entranced - standing rooted to the spot, glaring at the stock and ignoring all commands. In fact, this is another symptom of the dog lacking confidence. The dog can be trained out of this habit, particularly if it's young.
"Sticky Dogs" is a video dealing specifically with dogs which are thought to have "too much eye". Visit the online tutorials library for more details. (top)

Sheepdog Breeding

ISDS
The International Sheep Dog Society - based at Bedford, England. Keepers of the Stud Book and recognised governing body of sheepdog trialling.
Pedigree
The family tree of a dog - showing generations of ancestors. Pedigrees of ISDS dogs are copyright and must not be publicised without their permission. (top)
Registered Dog
Dog whose birth has been registered with the ISDS. Normally, the parents must be registered before a puppy is eligible for registration. (top)
Stud Book
Books kept by the ISDS for many years - recording the ancestory, registration and breeding details of all ISDS registered sheepdogs. (top)
Stud Dog
Male dog - usually ISDS registered and from excellent working lines - used for breeding purposes as well as sheepdog trials and / or farm work. (top)

General

Fell
Steep, rugged hill or mountain pasture - usually in the North of the UK (such as Cumbria) and traditionally populated with sheep. (top)
Hurdles
Often referred to in the USA as panels, hurdles are lightweight frames similar to a small gate which joined together, make a convenient and portable enclosure for containing sheep. (top)
Electric Fence
Fencing energised with high voltage (but low power and therefore harmless) electric current - often used to keep farm animals in an enclosed space. (top)

Sheep Types

Light Sheep
Usually smaller breeds from highland, hill or mountain farms, these are sheep which are easy for a dog to move (sometimes too easy as they run away or scatter with little or no provocation). (top)
Heavy Sheep
Stubborn sheep which are difficult for a dog to move. They will sometimes even attack a dog and can have a disastrous effect on its confidence. Heavy sheep are normally large, lowland types which keep together well but can be very stubborn. (top)
Dogged Sheep
After being used repeatedly for training sheepdogs, sheep become dogged. Lightly dogged sheep are very useful as they stay calm and it's easier for the trainee dog to keep them together. Extremely dogged sheep will either rush to the handler as soon as the dog is sent off to fetch them or others will bunch together tightly and be near impossible for the dog to move. Sometimes, they will crowd around the handler's legs, becoming extremely difficult to work with (and painful because they hurt your legs and tread on your feet). (top)

Read an Article on How To Train a Sheepdog.   |   Find out about our NEW Sheepdog Training DVD.


4 Replies to “Sheepdog Terminology and Training Commands”

  1. Good terms but how about adding the terms for the dogs such as the huntaway and the type of work this dog dose and all the other types

    1. Our page lists TRADITIONAL commands and terminology, David. We don’t cover huntaway dogs because they were not traditionally used for sheep herding in the UK, and even if they were, we’re not aware of any commands specific to that breed.

  2. What a great help this is. Traditional Training Commands with all the necessary information. Great.
    Yvonne
    Kate and Choco

We'd love to read your comments -